Dry Filter Booths
These are used for low production rate are usually fitted with either manually clean, recycle steel baffle filters or disposable filter pads. The spray booth can have additional accessories like lift tables, scissor lifts, hydraulic platforms, rotating tables, illuminations (non-flame proof, explosion proof), exhaust dampers, exhaust ducting. Specially designed filter fitment allows quick removal with minimum effort and faster cleaning/replacements. Booth Wall panels are recommended to be sprayed with a strippable coating.
Water Wash Type Spray Booths
For processing surface areas in excess of 60 sq met/hr manual operation, this is the most suitable choice. This has specially designed venturi to capture over-sprayed paint particles through air whirling and water wash. In addition, the exhaust chamber has a double water wash to prevent over-sprayed paint from escaping into the atmosphere. Accessories like lift tables, scissor lifts, hydraulic platforms, rotating tables, illuminations (non-flame proof, explosion proof), exhaust dampers, exhaust ducting are available.
Automatic Spray Painting
Larger production rate requires paint to be dispensed through auto-guns mounted on reciprocators. This system is also supported with height, traverse control and component recognition system to optimize paint consumption and uniformity in the coating film. Surfin integrates this with internationally renowned application equipment companies.
Manual Spray Painting
This is a handgun operation used for lower volumes. Typically, meant for requirements less than or equal to two manual operator systems. Surfin is working with internationally renowned application equipment companies to offer the customers, best possible optimum spray equipment.
Side Draft Water Wash Booth
These are used for cylindrical, small geometry parts and profiles. These are offered with double water wash design. Air Pressurized installations are optional depending upon local conditions of the factory, plant location, quality parameters.
Down Draft Central Suction Booth
Large W*L*H combination parts require painting for all sides. This is ideal for cubical parts. The incoming air flows around all the parts on conveyor/skid and capture the over-spray, carries it to central suction below the grating. Here, exhaust air is washed through water film, Venturi and double water wash through the exhaust chamber.
